Name: Viudez PKD Dish
SKU: 25939
Availability: InStock

Viudez PKD Dish

Use NON ABRASIVE MATERIALS

Available Grains from 16/20 – 30/40 – 60/80 – 100/120
Alloys – PKD – Segment designed for the treatment of resins or epoxy paints from 1 to 5mm.
Materials – Resins and Paints / Materials – Paints & EpoxyResins / Chlorinated Rubbers
Diamond Size and Application :
1. Roughing -Grain16 – Very large grain size, used for roughing concrete in poor or irregular conditions, removing paints or resins of a certain thickness.
2. Polishing – 30/40 grit – Large grit size, used after grinding to prepare the floor for the application of epoxy resins or to remove thin coatings. – 60/80 grit – Medium grit size, used after the first polishing step to prepare the surface for application without showing marks.
3. Fine – Grit 100/120 – Small grit size, used to leave the surface without marks for the application of transparent paint or for polishing with phenolics or resinoid sandpaper.

Our Sectors, Coronitas & Platos are made in Spain and follow all quality standards.

Categories – Surface treatments – Crowns & Sectors & Plates – Sector PKD

Sector PKD – Surface Treatments – Crowns & Sectors & Plates – Instagram

SOLGA DIAMANT, leader in the manufacture of diamond tools for floor treatment, thanks to its experience in the sector, continuously develops alloys that adapt to the needs of our customers. In their production processes, they select the best diamond and set of metallic powders for each type of work, from roughing to refining, including the polishing of concrete and abrasive materials.

Our technical sales team will support you in choosing the best possible alloy, grain size or crown, analyzing the requirements of the job, type of machine and material to be treated.

Alloy ranges available such as PKD, CPH10, BLCH, CPH20, CPH & SLURRY. Crowns for Abrasive or Abrasive & Hard . Sizes according to application Roughing, Polishing or Grinding.

SOLGA Diamant has a wide range of specifications, see thefollowing table with the codes we have.

Table Available Coming Soon…

At SOLGA Diamant, our goal is the highest quality by offering the best service. We select our raw material suppliers with the same premise that we use in our manufacturing, guaranteeing the highest level of quality. In our production process, we use the latest technologies in sintering and welding, obtaining products of the highest quality at competitive prices. Our commercial network collects the needs of the different markets, managing with the factory the development of new drill bits, continuously innovating to offer the best solution to each need. All our bits are welded by laser welding, induction welding is also available.

To check availability of a specific diameter you can contact us in the Contact link and also for technical questions about any of our products.