Name: Wet Cutting Glass
SKU: 26145
Availability: InStock

Wet Cutting Glass

Characteristics – INDUCTION Segment / HEIGHT 8 mm / Size
LACC
/ USE Glass / Diameters Ø300, Ø350 (other Ø on request)
mm

Metallic Center Geometry

Open Notch – AL1 / AL2 – The open notch favours the cutting speed due to the greater attack on the diamond and the alloy, as the segments are further apart from each other.
Closed Flange – LA / LAR – Flange designed to increase the performance of the discs. As the gap between segments is smaller, it favours their protection and therefore the wear is lower.
Narrow Closed Flute – LACC – Flute designed to achieve the best finish in the cut. As the segments are close together, we avoid jumping and thus reduce chipping of the material.
Continuous Band – BC – This band saw is designed for cutting delicate materials and where the level of finish must be very high.

Segment Geometry and Design

Laser – H 8mm – 10mm – For materials where abrasion requires a smooth side surface to avoid any extra erosion.
Turbo Laser – H 10mm – 15mm – For low abrasion materials where speed and ease of cutting is a priority, as there is less lateral friction and improved blade feed.

Our Wet Cutting Discs are manufactured in Spain and follow all quality standards.

Categories – Wet Cutting Discs – Wet Cutting Discs – Wet Cutting Disc Wet Cutting Glass

Disc

Wet Cutting Wet Cutting Glass – Wet Cutting Discs – Instagram

SOLGA DIAMANT, after more than 60 years in the diamond tools sector, has a wide range of cutting table discs, from discs for low requirement or professional applications to specific applications.

Our technical sales team will support you in choosing the best option by analyzing the requirements of the job, type of machine and material to be cut.

SOLGA Diamant has a wide range of specifications, see thefollowing table with the codes we have.

Table Available Coming Soon…

At SOLGA Diamant, our goal is the highest quality by offering the best service. We select our raw material suppliers with the same premise that we use in our manufacturing, guaranteeing the highest level of quality. In our production process, we use the latest technologies in sintering and welding, obtaining products of the highest quality at competitive prices. Our commercial network collects the needs of the different markets, managing with the factory the development of new drill bits, continuously innovating to offer the best solution to each need. All our bits are welded by laser welding, induction welding is also available.

To check availability of a specific diameter you can contact us in the Contact link and also for technical questions about any of our products.